Home > Oxygen Gas Sensor >

MOX-2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery

Product Categories

ShenzhenYijiajie Electronic Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

MOX-2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery

Name: MOX2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery
Brand: CITY
Price: 1 USD

Brand Name : CITY

Model Number : MOX-2 MOX2

Place of Origin : Britain

MOQ : 1

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 311/pcs/pre

Delivery Time : 3-5work days

Packaging Details : In tray

Output : 9-13 mV in 210mBar O2

Range : 0-1500mBar O2

Signal in 100% O2 : 100±1%

Resolution : 1mBar O2

Expected Operating Life : 1.5 x 106 % O2 hours at 20°C

Response Time (air to 100% O2) : T90 < 15s

Linearity : Linear 0-100% O2

Zero signal in N2 at 20°C : <200μV

Contact Now

Product Description:

MOX-2 MOX2 Oxygen Sensor Suction Machine Oxygen Battery

Features:

The specification is based on measurements made with cylinder gases using a flow rate of 100 mls min-1. Conditions at 20°C, 50%RH, and 1013mBar unless otherwise noted. Sensor Connections Suggested Mating Parts MOX-1 M16 thread, 3-pin molex header (MOLEX 22-29-2031) MOLEX 22-01-2035 (3-way housing) MOLEX 08-56-0110 (crimp terminals) MOX-2 M16 thread, 0.141”/3.5mm mini phone jack SWITCHCRAFT 750 mini phone jack MOX-3 M16 thread, UK data socket AMP P/N 520257-2 MOX-4 M16 thread, UK data socket AMP P/N 520257-2

Intended Use

These sensors are designed to be used to monitor the partial pressure of oxygen in anaesthesia, critical care,

incubators and general Oxygen monitors.

Stabilisation time

Allow at least 15 minutes to stabilise in instrument before calibration.

Cleaning and Sterilisation

In case of contamination the sensor may be cleaned with distilled water and allowed to dry naturally. The sensor is

not suitable for sterilisation by steam or exposure to chemicals such as ethylene oxide or hydrogen peroxide

Calibration Interval

These sensors are designed to have minimal drift over their useful lifetime however for maximun accuracy they should

be calibrated in 100% Oxygen before use.

Specifications:

Test Gas	Error (%O2)
50% He/50% O2	<1%
80% N2 O/20% O2	+1 to +1.5%
4% Halothane/28.8% O2 /67.2% N2O	+1.5% to 2%
5% Sevoflurane/28.5% O2 / 66.5% N2O	+1 to +1.5%
5% Enflurane/28.5% O2 /66.5% N2O	+1.2 to + 1.8%
5% Isoflurane/28.5% O2 /66.5% N2O	+1.2 to 1.8%
5% CO2 / 28.5% O2 /66.5% N2O	<1%

MOX-2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery

Product Tags:

MOX-2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	ShenzhenYijiajie Electronic Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

MOX-2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery

MOX-2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery

MOX-2 Oxygen Gas Sensor

Anaesthesia Oxygen Gas Sensor

Mox 2 Oxygen Sensor

MOX-2 MOX2 Anaesthesia Oxygen Gas Sensor Suction Machine Oxygen Battery Images